Manual Instruments
The NW-MI series is an economical and rugged manual noise instrument suitable for many applications. Applications for this instrument include system and component wireless testing, signal simulation, HDTV and CATV testing as well as use as a general purpose test source and as an economical source for bit error rate testing.
The instrument is supplied in a half rack case and comes with a front panel rotary attenuator to vary the output level.
Specifications:
Output:
White Gaussian Noise
Impedance:
50 Ohms
Output Connector:
SMA female
Noise Attenuator:
10 dB overall in 1 dB steps.
Operating temperature:
-20ºC to +75ºC
Model Number
Frequency
Output (dBm)
Flatness
OPTIONS
C: Combiner for input signal (6 dB loss)
N: N female ouput connector
BNC: BNC jack output connector
75: 75 Ohm impedance
100: Replace 1dB/ step with 10 dB/step 100dB overall attenuator *
110: Add a 10dB/ step attenuator for 110dB attenuation in 1dB steps**
RM: Rack Mount
* For models above 2 GHz, use option 60:
60: Replace 1 dB/ step with 10 dB/ step 60dB overall attenuator
** For models above 2 GHz, use option 69:
69: Add 10 dB/ step attenuator to 69dB overall attenuation in 1 dB steps
NW100M-MI
1MHz-100MHz
+13 min
+/- 1.0 max
NW300M-MI
1MHz-300MHz
+10 min
+/- 1.0 max
NW500M-MI
1MHz5100MHz
+10 min
+/- 1.5 max
NW1G-MI
1MHz-1GHz
+10 min
+/- 2.0 max
NW1.5G-MI
1MHz-1.5GHz
+10 min
+/- 2.0 max
NW2G-MI
1MHz-2GHz
0 min
+/- 2.0 max
NW3G-MI
10MHz-3GHz
0 min
+/- 2.5 max
NW4G-MI
10MHz-4GHz
-10 min
+/- 2.5 max
NW6G-MI
10MHz-6GHz
-10 min
+/- 2.5 max
NW10G-MI
10MHz-10GHz
-10 min
+/- 2.5 max
NW18G-MI
2GHz-18GHz
-14 min
+/- 2.5 max
NW2.7G-HP-MI
10MHz-2.7GHz
+30 min
+/- 2.5 max
Download Spec Sheet
The NW-MI series is an economical and rugged manual noise instrument suitable for many applications. Applications for this instrument include system and component wireless testing, signal simulation, HDTV and CATV testing as well as use as a general purpose test source and as an economical source for bit error rate testing. The instrument is supplied in a half rack case and comes with a front panel rotary attenuator to vary the output level. |
|---|
| Specifications: | |
|---|---|
Output: |
White Gaussian Noise |
Impedance: |
50 Ohms |
Output Connector: |
SMA female |
Noise Attenuator: |
10 dB overall in 1 dB steps. |
Operating temperature: |
-20ºC to +75ºC |
| Model Number | Frequency | Output (dBm) | Flatness | ||
|---|---|---|---|---|---|
OPTIONS C: Combiner for input signal (6 dB loss) N: N female ouput connector BNC: BNC jack output connector 75: 75 Ohm impedance 100: Replace 1dB/ step with 10 dB/step 100dB overall attenuator * 110: Add a 10dB/ step attenuator for 110dB attenuation in 1dB steps** RM: Rack Mount * For models above 2 GHz, use option 60: 60: Replace 1 dB/ step with 10 dB/ step 60dB overall attenuator ** For models above 2 GHz, use option 69: 69: Add 10 dB/ step attenuator to 69dB overall attenuation in 1 dB steps |
|||||
| NW100M-MI | 1MHz-100MHz | +13 min | +/- 1.0 max | ||
| NW300M-MI | 1MHz-300MHz | +10 min | +/- 1.0 max | ||
| NW500M-MI | 1MHz5100MHz | +10 min | +/- 1.5 max | ||
| NW1G-MI | 1MHz-1GHz | +10 min | +/- 2.0 max | ||
| NW1.5G-MI | 1MHz-1.5GHz | +10 min | +/- 2.0 max | ||
| NW2G-MI | 1MHz-2GHz | 0 min | +/- 2.0 max | ||
| NW3G-MI | 10MHz-3GHz | 0 min | +/- 2.5 max | ||
| NW4G-MI | 10MHz-4GHz | -10 min | +/- 2.5 max | ||
| NW6G-MI | 10MHz-6GHz | -10 min | +/- 2.5 max | ||
| NW10G-MI | 10MHz-10GHz | -10 min | +/- 2.5 max | ||
| NW18G-MI | 2GHz-18GHz | -14 min | +/- 2.5 max | ||
| NW2.7G-HP-MI | 10MHz-2.7GHz | +30 min | +/- 2.5 max | ||